Tiras con Leds RGB individualmente direccionables


stumbled upon an RGB light strip with individually-controllable LEDs. The strip uses 5 volts and is controlled by an HL1606. Because the strips are hard to find, this chip is mostly undocumented and he had trouble driving the strip. He was unable to get it working until he met with [John Cohn], who had previously reverse-engineered the serial protocol. Working together, they released a library for the Arduino to drive the strip. So far, the library only supports fading each LED, the only known functionality. If more strips like these were available, constructing LED matrices would be much easier. Embedded below is a video of the strip fading through the rainbow.
Hack A Day

Batería que se toca sola


Mix a cup of mechanical engineering with a dash of drum set and you end up with Steve, the robotic drummer. We know that it uses an MSA-T Midi Decoder but that’s about the extent of what has been shared. Just from observing the video, we think Steve’s got a few things going for him when compared to PEART, the robot drummer we saw back in 2005. Steve features two sticks for each drum and symbol and seems to be quite responsive.
Hack a day

20 Cosas que vale la pena saber acerca de la cerveza (The Oatmeal)














8 Rasones para hacer malabares

Juggling is a really good exercise for life. It has a lot of the fun parts of a soul sport (working to better yourself, non-competitive activity, etc.) but isn’t dangerous — unless you’re juggling fire or pancakes or something. That’s why I want everyone to learn.



Laughing Squid

Drone dispara laser para hacer mapeo 3D


The MIT Technology Review has unearthed a new laser-based 3D mapping robot that can produce results similar to those obtained from $100,000 systems at about a fifth of the cost. Funded by the US Army, researchers at the Stevens Institute of Technology have now demonstrated the Remotely Operated and Autonomous Mapping System (ROAMS, for short), which employs a mirror-based LIDAR system that bounces a laser off a rapidly rotating mirror and gleans environmental information from how long it takes for each pulse to bounce back. An array of video cameras and IR proximity sensors add to this recon bot's sentience, though you'll still need to be within a mile's range to operate it. So not quite yet ready for solo missions to Mars, but plenty useful for gathering data on our own planet.





Engadget

"La más grande tecnología es la humanidad en si misma"


Un interesante discurso acerca de la tecnología y su lugar no solo en nuestra cultura sino en el universo mismo y como nos afecta incluso a un nivel genético.


Make

Robot fotóvoro dibujante

Este robot "comeluz" asimila y traduce los estimulos luminosos los cuales tienen una influencia en la dirección y movimientos de los trazos que hace sobre el papel.

Región4
Make

Carro de juguete controlado via iPhone



Hack a day

Bailarina que funciona con arena


Este curioso juguete creado por Ron Fuller (Inglaterra), esta diseñado de tal manera que al caer la arena genera este simpatico movimiento.

Música: Nannou por los Aphex Twin.


Make

Science Gangster

Este bonito diseño nos demuestra que los Geeks tambien pueden ser rudos, así que pongamos algo de 50cent y seamos todos unos Science Gangsta' Players.

Adafruit

The Geek is Back

Renovando la fayuka, mi archivo personal documentando todo aquello que me hace ser geek y en un futuro cercano servirá para registrar mis priopias creaciones.

Laser Subactuatico



Este laser de 182mW es suficientemente poderoso para romper un globo debajo del agua. Para que esto ocurra se utilizó una pequeña linterna a prueba de agua y el laser fue colocado dentro de ella. A pesar de ser pequeña, hay suficiente espacio para que quepa la batería, el driver y el diodo laser. Un aro de aluminio fue colocado al rededor del diodo laser para que actue como disipador de calor. Los resultados en el siguiente video.



Hackaday